Please handle this product with care and inspect it regularly to ensure it is in good working order. If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support. |
Safety and Warnings
- Being use and turning on make sure water is flowing through the hot water faucet. Without water in the faucet the heater can damage the unit.
- When moving the water cooler, do not tilt more than 45° to avoid damage to the compressor.
- Always install the dispenser indoors, on a flat surface and at a distance no less than 15 cm from the back wall.
- Keep this appliance away from high temperatures and in a dry and ventilated place. Never install it in the open air or under rain or direct sunlight.
- Children should not use the red hot water tap.
- If the appliance is not going to be used for a long period of time, unplug it and drain all water in its interior.
- Before the first use and after a long period of not using it, the water tank and water pipes should be cleaned well. If possible, they should be disinfected, and the first heated water must be discarded (switch the heating switch to OFF while draining the system).
- Wash and disinfect the system every 3-6 months with a suitable cleaner.
- Do not pull out the cable to unplug. Do not turn ON and OFF the appliance by connecting it and disconnecting it from the source of electricity.
- Do not clean the outside of the appliance with water to avoid electric shock. Clean it with a soft cloth.
- If you are not using the appliance for a long period of time or during the night, you can turn it OFF to save energy.
- Do not attempt to change the power cord by yourself if it has any damage. Contact the manufacturer or specialized service personnel.
- The equipment must be installed keeping easy access to the electrical plug.
- WARNING - to avoid the risks of an unstable installation, the equipment must be installed following its instructions.
- WARNING - keep the ventilation openings at the back of the appliance uncovered and unobstructed.
- NOTICE - do not damage the refrigerant circuit.
- The environmental temperature for this appliance should be between 18°C and 38°C.
- This appliance can be used by children aged from 8 years and above and persons with reduced physical,sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and use maintenance shall not be made by children without supervision.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance
This appliance is intended to be used in household and similar applications such as
- staff kitchen areas in shops, offices and other working environments;
- farm houses and by clients in hotels, motels and other residential type environments;
- bed and breakfast type environments;
- catering and similar non-retail applications. - Do not place other appliances inside this equipment unless those are recommended by the manufacturer.
- Do not store explosive substances such as spray cans inside this appliance.
Product Features
- Modern design.
- Energy-saving, low noise, resistant structure and great stability. Suitable for use in homes, hotels, schools, etc.
- Double security system, “temperature control " and "heating protection". Hot water temperature is always between 80 ° C and 95 ° C.
- The water dispenser's cooling system is durable and suitable for use during the summer.
- This product can be used with bottled water or a water purifier.
Product Overview
No. | Name | No. | Name |
1 | Bottle Seat | 7 | Normal Water Faucet |
2 | Power Switches (Hot and Cold) | 8 | Hot Water Faucet |
3 | Indicator Lights | 9 | Drip Tray |
4 | Information Plate | 10 | Electric Power Cord |
5 | Safety Push Button | 11 | Drain Plug |
6 | Cold Water Faucet |
Note: The graphic is for reference only and is subject to change.
Specifications
Model |
BDT508 |
Voltage - Frequency |
220V~50Hz |
Heating power |
420W |
Cooling power |
65W |
Water Heating capacity |
5.0L/h |
Water Cooling capacity |
1.0L/h |
First Use and Operation
- Before first use clean the system to flush out all chemical residue and debris left from the manufacturing process. Allow water to flow through all faucets.
- Insert the bottle vertically on the seat and press the water faucets until water flows out of all the faucets. Ensure water is sitting in the red hot water faucet before turning on the water heater to avoid damage to the unit.
- Insert the power plug to the wall socket and turn the electric switches to ON position, one
at a time to avoid overloading the circuit, to start the appliance. DO NOT TURN ON BOTH SWITCHES AT THE SAME TIME. Cooling and heating indicator lights should light up. The appliance is designed to provide hot or cold water whenever you need it. It will automatically turn on and off when the water reaches the desired temperatures.
Troubleshooting
Problem |
Possible cause |
Solution |
Lights not on |
1. Appliance is not connected to the electrical system |
1. Make sure that the switch is ON and the plug is connected |
Leaking |
1. The water container is broken |
1. Replace the water container |
Not heating |
1. Heating switch is damaged or does make not contact |
1. Replace the switch and check the connections |
Not cooling |
1. Cooling switch is damaged or does not make contact |
1. Replace the switch and check the connections |