Safety & Warnings
- Read all instructions before using the product and retain for reference.
- If you have a cardiac pacemaker or other electronic medical equipment, you should consult your physician before using this product.
- This product contains small parts and packaging which may pose a choking hazard. Keep out of reach of children.
- This appliance is designed for consumer use: Follow directions and use only as described.
- Always drive safely, avoid distractions and follow required laws.
- Permanent hearing loss may result from long-term exposure to sound at high volumes. Always set the volume to as low a level as possible. Adjust slowly if increasing volume is required. Avoid using earphones for extended periods of time.
- If you experience discomfort or ringing in your ears, stop use immediately. With continued use at high volume, your ears may become accustomed to the sound level, which may result in permanent damage without noticeable discomfort.
- This appliance contains no user-serviceable part, If it suffers any failure or damage. Cease usage of contact Kogan Support.
Button Layout
General Function
Function |
Operation method |
Remarks |
Turn on/Off |
Press MFB for 3 seconds |
|
Playing/Pause music |
Press the MFB |
|
Reject call |
Press MFB Twice |
Or hang up on phone |
Answer/End call |
Press MFB Once |
Or hang up on phone |
Last number redial |
Press MFB Twice |
To redial last call |
Previous Track |
Long Press (-) |
Bluetooth mode or with micro SD card (Max.32G)
|
Next Track |
Long Press (+) |
|
Volume up |
Short Press (+) |
|
Volume down |
Short Press (-) |
Pairing
- Press and hold the MFB for 5 seconds until LED indicator flash red and blue, indicating it is in pairing mode.
- Turn on Bluetooth on your device, select "Kogan TF Magnetic Earphones" pairing to them in bluetooth setting.
- When successfully, the LED indicator will flash blue.
- If prompted for a password, enter 0000.
Note: The earphones will reconnect automatically. If not, press MFB once or reconnect through bluetooth.
Technical Specification
Bluetooth Specification | v4.2 |
Bluetooth Profile | HFP1.6, HSP1.2, AVRCP1.4, A2DP1.2 |
RF Range | 10M |
Noise Reduction | CVC |
Stand-by Time | About 120 hours |
Calculating Conversation Tie | About 4 hours |
Charging Time | About 2 hours |
Dimension(l*W*H) | 42 x 12 x 10mm |
Weight | 16.4g |