Pet Nail Grinder - (PANALGRDNRA) - Manual

Safety and Warnings

1. Do not tear down the clipper.
2. Do not clean product by water flush, and keep the unit away from damp situation.
3. Do not use any corrosives such as alcohol, gasoline etc. to clean the surface.
4. Avoid being charged above 40°C or below 0°C.

* If the product is not used for a long time, please charge it once at least every three months.
* Product becoming hot during use or charging is normal.

Disposal of Battery
The inside is rechargeable battery. Please take the battery out before discarding it and dispose the battery in an environment-friendly way.

Hardware Overview

Charging Method

1. Insert the charging plug into the slot of the nail grinding machine.
2. Insert the UBS plug into the USB charger (mobile phone charger).
3. Confirm to insert the charger into the outlet when the nail grinding machine is in the OFF state.
4. The blue indicator light flashes in the charging state. After charging, it continuously lights up, rather than flash.

Operation

1. Please select an appropriate port according to the pet's nail characteristics.

2. When grinding the nail, please gently put the pet's nail into the nail grinding hole. The grinding time shall not be longer than 5min each time.
3. If a nail grinding machine is used for the pet for the first time, it is suggested to grind the sharp or long nail of the pet first. Please note not to grind too much and make the pet adapt to the nail grinding machine.

* Please clean the impurities on the nail grinding wheel surface when the nail grinding effects are reduced.

Cleaning

1. Rotate the protective cover of the nail grinding wheel anticlockwise and take it down.
2. Start the nail grinding machine to make the nail grinding wheel rotate.
3. Gently touch the rotating nail grinding wheel with an eraser or a piece of cloth to remove the nail powder left on the grinding wheel surface.

Product Specification