Komodo Biker Swag for (KMDSWGBIKNA/KMDSWGBIKGA) - Manual
Ensure the pegs are securely installed.
Allow 24 hours for the mattress to fully expand after opening for the first time.
Avoid continuous exposure to sunlight as it will cause the canvas to weaken. Fading is a sign of this.
Condition canvas before use by washing with a garden hose and allowing to dry. This causes stitching thread to swell and allow a seal to form. Wipe surface with cold water after use and use a brush and mild detergent to remove marks.
When storing, ensure the swag is completely clean and dry. Store unrolled to extend product life.
Overview
1 x Swag Tent
2 x Poles
6 x Pegs
2 x Rope
1 x Floor Matt
Assembly
Fully unpack the product and ensure all parts are supplied and in good order.
Secure the swag with the L-shaped pins by sliding them through the rings and pinning at all 4 corners.
Roll out the mattress inside the swag.
Join the long poles together and slide them through the sleeves at the head and foot of the swag, fasten them and hook the C-clips onto the pole.
Connect guide line from head end to tree or with a peg.