Safety & Warnings
Handle with care and inspect regularly to ensure product is in good working order. If these devices show any signs of damage: stop use, power off the product and contact Kogan.com support. |
- Read all instructions before using the appliance and retain for reference.
- This appliance is designed for consumer use: follow directions and use only as described.
- Please note, both devices require batteries.
- Please keep these devices out of reach of young children.
- Batteries can lead to serious injuries in as little as two hours or death due to chemical burns and potential perforation of the oesophagus.
- Ensure the battery compartment on each device is secure.
- Do not allow the keyboard or mouse to be exposed to water, heat, direct sunlight or overhang where it can be pulled or otherwise be damaged or pose a hazard.
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support after consulting the Troubleshooting section of this manual.
System Requirements & Specifications
The keyboard and mouse requires Windows XP, Vista, 7, 8, and 10 or MAC OS X 10..4 or later.
Product Description
- Connection Type: USB Type-A, Plug and Play
- Wireless Frequency: 2.4GHz
- Number of keys: 102 normal keys and 9 hotkeys
- Distance of operation: Up to 8-10 metres
- Power Source:
- Keyboard - 2 x AAA batteries
- Mouse - 2 x AAA batteries
- Batteries are not included
- Spill proof design keyboard
- CPI: 800-1200-1600 DPI
Technical Specifications
- Material: ABS Plastic
- Net weight:
- Keyboard: 420g
- Mouse: 6g
- Size:
- Keyboard: 415 x 140 x 25mm
- Mouse: 108 x 74 x 38mm
- Voltage:
- Keyboard: 3VDC
- Mouse: 3VDC
- Total Travel: 4.0 ± 0.5mm
- Operating Force: 88 ± 8g
- Operating Life: > 10 million keystrokes
- Operating Temperature: 0°C to 50°C
- Storage Temperature: -20°C to 60°C
- Operating Humidity: 20%RH to 90%RH
Set up
- Remove the battery cover of the keyboard and insert 2 AAA batteries. Replace the battery cover.
- Remove the battery cover of the mouse and install it with 2 AAA batteries. Replace the battery cover.
- The mouse has an ON/OFF switch located on the underside. Push this to the ON position.
- Take out the nano receiver from the mouse and plug it into the USB port of the computer.
- The computer will then connect the keyboard and mouse automatically.
Hot keys
|
Home |
|
Forward |
|
|
![]() |
Volume Down |
|
Play/Pause |
|
Volume Up |
|
Stop |
|
Mute |
|
Previous |
|