Safety & Warnings
|
Handle with care and inspect regularly to ensure product is in good working order. If this product, power supply cord or plug shows any signs of damage: stop use, unplug the product and contact Kogan.com support |
- Read all instructions before using the device and retain for reference.
- This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
- This appliance is designed for consumer use: follow directions and use only as described.
- Do not allow the power cord to be exposed to water, heat, direct sunlight or overhang where it can be pulled or otherwise be damaged or pose a hazard.
- Do not expose the device to fire or water, as this will destroy the device and may pose an electrical hazard.
- Do not use in high temperature or high humidity environments.
- Modifying or dismantling the product may pose a safety risk.
- In order to ensure the durability of the battery during irregular use, charge and discharge the power bank once every three months.
- Storage temperature of the battery is between -20°C and +85°C
- Operating temperature of the battery is between 0°C and +45°C
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support after consulting the Troubleshooting section of this manual.
Included Parts
- Power bank
- User manual
- USB-A to Type-C cable
Specifications
|
Battery Cell |
Lithium-Ion |
Power Capacity |
5000mAh @ 3.7V |
|
Output Watt hours |
Maximum 18.5Wh |
Rated Input |
5V = 2.4A |
|
Rated Output |
Type-C: 5V = 2.4A USB: 5V = 2.4A |
Dimensions |
112.3 x 26 x 24.8mm |
Operation
To charge the power bank
Please refer to the below diagram.
- Connect the included USB-C charging cable to a USB power supply such as an AC charger or computer USB port. Connect the smaller end into the Type-C Input port on the power bank.
- The LEDs will blink while charging.
- When fully charged, all indicator LEDs will be illuminated.
Please note, the adaptor is not included, it is intended for demonstration purposes only.
To charge other devices
- Connect a compatible USB cable from your device to the power bank and press the power button.
- Charging will commence once the power bank is powered on.
- LED status indicators for battery percentage are described in the diagram above.