Safety & Warnings
- Read all instructions before using the appliance and retain for reference.
- Do not allow the product to be near fire or water
- Do not place heavy objects on the product.
- Do not use the product in high product or high this product under high temperature and high humidity will reduce the product life.
- Use only approved chargers above the rated input voltage.
- Do not place foreign materials, such as metal objects, magnets, and magnetic stripe cards, between the mobile device and the wireless charger. The mobile device may not charge properly or maybe damaged due to overheating.
- Be careful of your fingers when changing the wireless charging surface angle.
- Depending on the location of the mobile device’s wireless charging coil, your mobile device may not charge properly.
- Wireless charging may not work if the phone’s case is too thick.
- Most mobile phones are designed to switch to wired charging if connected.
- If you use the wireless charger in areas with weak network signals, you may lose network reception.
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support.
Overview
Device Layout:
NOTE: Design and layout may differ due to product version.
a |
Charging Surface |
b |
Indicator Light |
c |
Stand |
d |
Type-C Input |
e |
Charging Coil |
f |
Fan Vent |
Operation
Connect wireless charger to USB power source.
Place a supported mobile device on the wireless charging surface. You can also charge your mobile device while it is resting in the phone stand. Push the wireless charging surface back to extend the phone stand. Then, push the wireless charging surface upwards to change its angle, and place your mobile device on the phone stand. Charging will begin when the wireless charging surface meets the mobile devices wireless charging coil.
When the mobile device is fully charged, remove the mobile device from the wireless charger.
Fast Wireless Charging
Simply place a mobile device that supports fast wireless charging on the wireless charger.
Use only approved chargers that support fast charging (9V/1.67A, 9V/2A, 12V/2.1A).