Product Specification
| Material | ABS (Fireproof material) + PC, aluminium alloy, non-slip silicone transmission |
| Distance | 0-8mm |
| Product input | 5V-2A /9V-1.67A |
| Highest Efficiency | 60-72% |
| Mainly applicable to | iPhone 8 / Plus /X and Samsung Galaxy S8 / S8+ / S7 / S7 Edge, etc |
Note: The unit will automatically switch between fast charging or slow charging. If the mobile phone supports fast charging, it will select fast charging mode automatically.
Installation Steps
1. Connect the clip and main body
The nut is clamped on the 360° ball head at the air outlet, then insert the black cover and tighten the nut.
2. Connect the air vent
Press the handle firmly so that it opens, then insert a blade of the air outlet. After releasing the handle, the blades are clamped.
3. Connect the car charger
As shown in the figure below, one end of the USB cable is inserted into the charger, the other end is inserted into the car USB adapter, or the USB port on the car if applicable.
Product use
- All mobile phones that support Qi wireless charging technology can be used directly.
After completing the above installation and connection, you can insert the phone with one hand.
Remarks
- This product cannot be near sources of high heat.
- Never let the unit come into contact with liquids.
- Please do not place heavy objects on the charger.
- Using this product under high temperature and high humidity will reduce the units life.