Safety & Warnings
- Read all instructions before using and retain for reference.
- Do not put the device into fire or water, as this will destroy it and may pose an electrical hazard.
- Do not use in high-temperature or high-humidity environments
- Do not disassemble, squeeze or puncture the device.
- This appliance contains no user-serviceable parts. If it suffers any failure or damage, cease usage and contact Kogan Support.
Product Notes
- This adaptor is only for use with 2016/2017 13” and 15” MacBook Pro devices.
- The Thunderbolt 3 USB-C port supports data transfer, video output, and charging, while the standard USB-C port only supports data transfer and does not support USB-C video output or USB-C charging.
- Compatible displays and cables are required to achieve maximum video resolution.
- One USB-A port supports a charging output of up to DC5V/900mAh and two USB-A ports support a total charging output of DC5V/1.5A.
Included Parts
- USB C Hub
- Quick Start Guide
Product Diagram
1. Thunderbolt 3 USB-C port
2. USB 3.0 Type-A ports
3. Standard USB-C port
4. SD Card slot
5. TF Card slot
6. USB 3.1 Type-C connector
7. HDMI port
Specifications
Material |
Aluminium alloy and ABS plastic |
Interface |
Thunderbolt 3 USB-C port x 1 |
Connector |
USB 3,1 USB Type-C Connector |
Dimensions (Lx Wx H) |
111 x 28.4 x 10 mm |
Port Specifications
USB 3.0 Type-A port |
Data transfer: up to 5 Gbps |
Thunderbolt 3 USB-C port |
Data transfer: up to 40 Gbps Video output: up to 5k or 2x4k @ 60Hz |
Standard USB-C port |
Data transfer: up to 5 Gbps |
HDMI output port |
Up to 4k @ 30 Hz |
SD/TF card slot |
Supported memory card capacity: up to 512GB Support memory card types:
Read/write speed: up to 104MB/s |
System requirements |
MacBook Pro 2016/2017 (13-inch or 15-inch) |
Plug and play |
Yes |
Operation
Simply connect the device to your MacBook Pro using a USB-C cable.
- HDMI Output: connect to an HDTV, projector, or compliant device with an HDMI cable via the HDMI output port and watch videos from your MacBook Pro.
- USB-A 3.0 Data Transfer: connect to USB-A enabled smartphones, tablets, hard drives, mice, keyboards, or other compliant device via the USB 3.0 Type-A ports on the hub.
- Macbook Pro Charging: connect to a USB-C power adaptor via the Thunderbolt 3 USB-C port on the hub.
- HD Video Output: connect to a display via the Thunderbolt 3 USB-C port on the product.
- USB-C Data Transfer: connect to USB-C enabled smartphones, tablets, or other compliant device via either the Thunderbolt 3 USB-C port or the standard USB-C port on the hub.
- SD/TF Card Reader: Insert your memory card into the SD/TF card slot on the product and directly access files stored on the SD/TF card on your MacBook Pro.
Please note: For best performance, devices connected to this hub should not exceed a total current of 900mA when no power source is connected to the hub. Otherwise, output current may become unstable or disconnected.
For reference, the list below shows typical current rating for electronic accessories:
- Mouse: 100mA
- Portable hard disk: Maximum 500mA
- USB 3.0 portable hard disk: Maximum 900mA
- Keyboard: Maximum 500mA
Please double check the current of your devices before connecting to the hub.