Safety and Warnings
- Read all instructions before using this unit and retain this document for future reference.
- Do not leave or use the unit near fire, stoves or other sources of heat.
- Do not use the unit in areas with high humidity and do not dip or submerge the unit in water.
- Using the unit in areas with high temperature and high humidity may damage the unit and reduce the product life.
- This unit contains no user-serviceable parts. If it experiences failure or damage, cease use and contact Kogan.com Support.
- This product contains a CR1632 button battery. To avoid the risk of accidental ingestion, keep out of reach of children and pets.
Operation
- Hold down the shutter button for 2 seconds to power the unit on. The LED will illuminate, and the unit will be in Bluetooth pairing mode until it has been paired.
- To pair, turn on the Bluetooth function of your phone, scan for devices to locate the unit, and click on the unit’s name to pair/connect.
- Click the shutter button on the unit to take photos while the camera app is open on your phone. The LED will illuminate.
- If the unit is sitting idle and unpaired for 3 minutes, it will turn off automatically.
- If the unit is paired but has been idle for 10 minutes, it will turn off automatically.
- Hold down the shutter button for 3 seconds to turn the unit off. The LED will flash 3 times.
Replacing the Battery
To replace the batteries, follow this short guide:
Specifications
Main Material |
Stainless Steel |
Mount Holder |
55-85mm |
Collapsed Length |
186mm |
Extended Length |
700mm |
Weight |
155g |
Battery |
CR1632 (disposable) |
Camera Angle |
200° |
Compatible OS |
Android OS 4.2.2 or iOS 5.0 and above |