Please follow the instructions below to ensure you don't damage the TV when attaching the stand:
-
Spread supportive, stable cushioning out over the floor and carefully place the TV face down on top.
-
Attach the neck to the metallic gasket.
-
Secure this to the glass stand using the four longer screws as shown in figure 1.
- Fasten the assembled stand to the back of the TV using the shorter screws as shown below:
WARNING: If you incorrectly use the longer screws to fasten the TV to the stand, the screws may push through and damage the internal wiring of the unit, resulting in large, purple lines appearing on the TV.
