Assembly
Release mounting plate by simply pushing back off the housing.
Attach mounting plate to the ceiling of your garage with enclosed screws.
Push top part back on to the mounting plate.
Operation
Position laser beam emitter on housing so that it is pointing to a position clearly visible from the driving seat, e.g. dashboard or a point between windscreen and bonnet.
When you drive into the garage, the motion detector will activate the laser. Drive forward until the laser beam is shining on the spot you have chosen. The laser beam lights up approx. 30 seconds after it has been activated by the motion detector.
Power is supplied via 3x 1.5V AA batteries.
Note
The laser parking aid is a device to make parking easier. Do not use it as a substitute for careful driving or rely solely on the laser parking aid. Park slowly and cautiously and look out for people or objects. The driver must take responsibility for safe driving. Our liability for damage, in particular for damage to persons and property, loss of time as well as third party liability is excluded.
Do not dispose of this article in the household waste. Take it to a public collection point for electric and electronic waste.
Caution: Avoid looking directly into the laser beam as it can damage your eyes.