Safety & Warnings
Read all instructions before using the appliance and retain for reference.
- Unplug the monitor before cleaning it with a slightly damp, clean cloth.
- Wiping the screen once it has been turned off with a dry microfibre cloth is recommended.
- Do not use cleaning alcohol, ammonia-based liquids or other harsh cleaners.
- This monitor is designed with ventilation holes on the back of the casing. Do not cover or block them.
- Avoid placing the monitor near heaters, stoves, fireplaces or other sources of heat, as well as in rooms lacking in adequate ventilation.
- Do not insert any objects or spray any liquids into the vents.
- Do not position the monitor in unsafe locations. If the monitor falls, it may be damaged and may injure nearby people.
- Unplug the monitor if it is not going to be used for an extended period of time.
- Do not place heavy objects on the monitor, its power cord or any connected cables.
- Do not open the back panel of the monitor, as it contains a high-voltage current even when not plugged in.
Overview
Monitor Controls
|
1. |
Menu: Press to display OSD menu and enter sub-menus |
4. |
Exit: Press to exit OSD menu |
|
2. |
Down: Press to move down in menus |
5. |
Power: Press to turn monitor on/off |
|
3. |
Up: Press to move up in menus |
6. |
LED Indicator: See above |
Note: Button 4 (E) can also switch between colour gamuts when a compatible graphics card and HDMI / DP connection are in use.
Indicator Light
Solid blue/green/white light indicates power is on and monitor is operating normally.
Flashing blue light indicates no video source has been detected.
Red light indicates no signal detected or insufficient power received: check computer is set to send video output and that all cables are fully inserted and secure.
Monitor Ports
|
7. |
Audio output to connect headphones or powered speakers |
9. |
HDMI Input |
|
10. |
DVI Input |
||
|
8. |
DisplayPort input |
11. |
Power Input |
Picture in Picture (PIP) Input
- PIP is supported with any secondary connection separate to the primary connection being used (e.g. secondary DP with primary HDMI/DVI). The recommended configuration is 2x 1440p @60Hz.
Specifications
|
Screen Size |
35’’ |
Output |
Audio |
|
Curvature |
1800R |
Signal Input |
DP, DVI, HDMI |
|
Viewing Angle (H/V) |
178°/178° |
Power |
AC 100-240V, 50/60Hz 1.5A |
|
Aspect Ratio |
21:9 |
OSD Language |
English，简体中文, 한국어, Spanish |
|
Resolution |
2560 x 1080p |
Environmental Temperature & Humidity |
Operating temperature: 0~50°C |
|
Backlight |
E-LED |
Storage temperature: -20~60°C |
|
|
Default Colour Temperature |
6500 |
Operating relative humidity: (non-condensation) |
|
|
Typical Brightness |
300 |
Height Adjustment |
Yes |
|
Contrast Ratio |
2000:1 |
VESA Mounting |
Need VESA additional bracket |
|
Dot Pitch |
0.0126*0.0126” |
Dimensions |
922x197x479mm |
|
Response Time |
6ms |
Weight (Net/Gross) |
8.62Kg/10.836Kg |
|
Refresh Rate |
200Hz |
System Requirements
Operating System Windows® 7 / Windows® 8 / Windows® 10 64-bit or higher
Processor (CPU) Intel® Core™ i5 or AMD Phenom™ II X3 or higher
Graphics Card NVIDIA® GeForce® GTX 950 or AMD Radeon™ R9 380 or higher
Memory 6 GB RAM
Connectivity
|
Power Cable Connect the included power cable to the monitor, then plug the other end into an AC outlet. |
|
|
3.5mm Audio Output
Connect a 3.5mm audio device
Listening to loud audio for prolonged periods of time may permanently damage your hearing. |
|
|
DisplayPort
Connect to this monitor from your compatible computer using a DisplayPort cable (included) to receive a high-quality digital video signal. |
|
|
HDMI
Connect to this monitor from your compatible computer using an HDMI cable (not included) to receive a high-quality digital video signal. |
|
|
DVI
Connect to this monitor from your compatible computer using a DVI cable (not included) to receive a high-quality digital video signal. |
|
Operation
Setup
- For basic setup, connect the monitor to your PC's graphics card using the included DisplayPort cable. An HDMI or DVI cable (not included) can be used instead.
- Connect the cable to the corresponding connector on your monitor as outlined in the Connectivity section of this user guide.
- Connect the power cable as outlined in the Connectivity section of this user guide.
- Press the power button on your monitor to turn it on.
OSD Menu
The On-Screen Display (OSD) menu can be used to adjust your monitor's settings.
When first connecting the monitor to your PC, settings will adjust automatically based on the configuration of your PC.
1. Press any button to activate the navigation window.
2. Press M to enter the OSD screen
3.Press Up or Down to browse functions and change
Press M to enter the sub-menu for a highlighted sub-menu
Press E to exit the current screen
List of Functions
|
Main Menu |
Sub-Menu |
Options |
Description |
|
Input Source |
DVI |
NONE |
Select DVI input |
|
HDMI |
NONE |
Select HDMI input |
|
|
DP |
NONE |
Select DP input |
|
|
Brightness/Contrast |
Brightness |
0~100 |
Adjust display brightness |
|
Contrast |
0~100 |
Adjust display contrast |
|
|
DCR |
ON |
Turn DCR function on |
|
|
OFF |
Turn DCR function off |
||
|
Colour Setting |
Gamma |
Gamma 2.0 |
Set gamma |
|
Gamma 2.2 |
|||
|
Gamma 2.4 |
|||
|
Picture Mode |
Standard, Text, Movie, Game, FPS, RTS |
Set a preset display mode |
|
|
Colour Temperature |
Warm, Cool, User |
Set the display colour temperature mode |
|
|
USER |
Red, Green, Blue |
Set custom colour values |
|
|
Low Blue Light |
0~100 |
Set the display blue light filtering |
|
|
Hue/Saturation |
Hue, Saturation |
Set the hue and saturation |
|
|
Picture Quality Setting |
Bypass |
On, Off |
Turn the bypass function on/off |
|
Sharpness |
0~100 |
Set display sharpness |
|
|
Response Time |
Off, High, Middle, Low |
Change response time |
|
|
Noise Reduction |
Off, High, Middle, Low |
Reduce image noise caused by signal interference |
|
|
Super-Resolution |
Off, High, Middle, Low |
Enhance image resolution |
|
|
Dynamic Luminous Control |
On, Off |
Strengthen greyscale expression |
|
|
Display |
Aspect Ratio |
Wide Screen, 4:3, Auto |
Set display ratio |
|
DP Version |
DP 1.1, DP 1.2 |
Set DisplayPort version |
|
|
LED Mode |
Normal. Off, Flicker |
Set LED effect |
|
|
Audio (no built-in speakers) |
Mute |
On, Off |
Toggle Mute on/off |
|
Volume |
0-100 |
Set the audio volume |
|
|
Audio Source |
HDMI, DP |
Display the input signals from (HDMI or DP) |
|
|
Multi-Window |
Multi-Window |
Off, PIP, PBP 2Win |
Set Picture-in-Picture or Picture-by-Picture options |
|
PIP Size |
Small, Medium, Large |
Adjust PIP/PBP display window size |
|
|
PIP Position |
Top Right, Top Left, Bottom Right, Bottom Left |
Adjust PIP/PBP window position |
|
|
Swap |
NONE |
Swap primary and secondary inputs |
|
|
Other |
Language |
English，简体中文，한국어，Spanish |
Set OSD language |
|
OSD H-Position |
0-100 |
Adjust OSD horizontal position |
|
|
OSD V-Position |
0-100 |
Adjust OSD vertical position |
|
|
OSD Transparency |
0-100 |
Set OSD transparency |
|
|
OSD Time Out |
5-100 |
Set OSD timeout in seconds |
|
|
OSD Rotation |
Normal, 90, 180, 270 |
Rotate OSD for ease of use on rotated displays |
|
|
Reset |
Reset configuration |
Restore factory defaults |
AMD FreeSync
If desired, you can use the monitor’s AMD FreeSync feature. The feature itself is on by default. In order to use this feature, please note you must have hardware with AMD FreeSync™ capability, a DisplayPort cable, and the latest graphic drivers. To use this feature, connect the appropriate cable to the DP connectors on both the computer and Monitor. After connecting, you will receive a prompt to enable the feature on your computer.
Gameplus
Press the up button in the OSD settings to toggle on-screen centre icons for FPS games or other scenarios.
Troubleshooting
|
Issue |
Possible cause / Steps to resolve |
|
Screen is blank |
Ensure power button has been pressed |
|
Check brightness/contrast |
|
|
Check indicator light; if flashing, no video signal is being received |
|
|
Check display settings of connected device |
|
|
Image out of focus |
Check video cable connection |
|
Screen is flashing |
Issue with power source: contact Kogan.com |
|
Ensure devices which could cause magnetic disturbance (unshielded speakers, fluorescent lighting, AC transformers, etc.) are a safe distance away |
|
|
Colour bleeding, distortion or other unusual effects |
Check video cable connection |
|
Connect to other video source for comparison |
|
|
Inspect condition of ports on monitor and graphics card |
|
|
Adjust colour settings in monitor and PC display settings |
|
|
Screen strolling, rolling or moving |
Check source frequency is within 55-76Hz |
|
Check video cable connection |
|
|
Indicator light not illuminated |
Check power connection |
|
Check power has been turned on |
|
|
No video signal |
Confirm PC and graphics card compatibility |
|
Inspect condition of ports on monitor and graphics card |
|
|
Dim image |
Adjust brightness/contrast |
|
Image jitter/moire pattern |
Nearby electronic equipment may be causing interference |
|
Indicator on or flashing but no image on screen |
Confirm monitor has been turned on |
|
Confirm graphics card is installed |
|
|
Check video cable connection |
|
|
Inspect condition of ports on monitor and graphics card |
|
|
Check if PC is asleep or in standby, etc. |
|
|
Position or size incorrect |
Check settings in monitor OSD menu and PC display settings |