Please handle this product with care and inspect it regularly to ensure it is in good working order. If the product, power supply cord or plug shows any signs of damage: stop use, unplug and contact Kogan.com support. |
Safety & Warnings
- This appliance is not suitable for children and handicapped people. Please keep children away from the appliance while in operation.
- Never wash this appliance in water directly to avoid short circuit and electric shock.
- Never plug any metal into the gaps or holes on this appliance to avoid possible electric shock.
- Never plug or unplug the power with a wet hand to avoid electric shock.
- Never unplug the power cord by pulling violently. The power cord should not be pulled or twisted violently.
- The power cord should not contact other heating appliances or heat sources to avoid a fire hazard. Always unplug the power cord after use.
- Clean the metal parts on the plug regularly to avoid weak contact.
- Please always connect this appliance to an independent socket with the capacity above 10A and make sure that the plug is completely plugged in and well contacted.
- Always keep hands and face away from the steam valve to avoid scalding by the steam. Never cover the steam valve with a cloth; otherwise, the cover may be distorted due to overheating.
- During operation, never touch the cover or any metal parts of the appliance to avoid scalding. When carrying the appliance; please prop the bottom with a cloth to avoid scalding.
- This appliance should not be used on any unstable surfaces or objects which cannot resist high temperature to avoid a fire hazard.
- Please keep the appliance from fire or damp surroundings to avoid a possible hazard.
- The inner pot is not intended to experience violent impact. Any distortion of the inner pot may cause malfunction and other hazards of the appliance.
- Never clean the inner pot with any hard tools to avoid damage to the non-stick coating.
- Never heat the inner pot with other heating source and never use another pot to replace the inner pot of this appliance to avoid any problem.
- Never start the appliance until the inner pot is in the right position or the pot is empty without any water or other food.
- The heating element will be very hot after using, never touch it to avoid scalding.
- This appliance is not allowed to be disassembled by any untrained people. If any repair is needed, please contact the service centre.
- If the power cord is ruined or damaged, never replace it with another power cord; please contact service for the correct one.
Overview
Main Parts
Control Panel Instructions
![]() |
"START” button Gently press this button for 3 seconds to start the program |
![]() |
"MENU” button Press this button to choose the program |
![]() |
"STOP/KEEP WARM” button
|
![]() |
"HOUR/MIN” button Press this button to change the time between hour and minute during adjusting time. |
![]() |
+ - button Press to select a cooking program or adjust time or adjust the temperature. |
![]() |
"TIMER/TEMP°C” button Press to adjust time and temperature. One press for adjusting the time, one more press for adjusting the temperature. |
![]() |
"PRESET” button Press to preset the time before the cooking. |
Operation
Program Instructions
Choosing the Program
- Plug in the power, the buzzer will sound and the appliance is on standby.
- Press the "MENU” button to select the cooking program, press "+” “-“ button to select back and forth between the programs when the appliance is on standby.
- After choosing the preferred program, press "START” button three seconds to start the program.
Keep Warm
- When the cooking program is finished, the appliance will enter Keep Warm automatically and the display will count the keep warm time.
- Press "CANCEL/KEEP WARM” button for three seconds to enter Keep Warm manually.
- The maximum time of Keep Warm is 24 hours.
How to Set the Cooking Time
- After selecting the cooking program, press "TIMER/TEMP” and "+” "-” buttons to adjust the cooking time. Press the "HOUR/MIN” button to shift hour or min adjustment.
- Press the "START” button for 3 seconds to start the program after adjusting the cooking time.
- If cooking with default time for the program, just press the "START” button for 3 seconds to start the program once selecting the program.
Delay Cooking
- After selecting the cooking program and press the "PRESET” and "+” "-” buttons to preset the time.
- Press the "START” button to enter preset, the preset light will be on and the countdown starts.
After presetting the delay time, the appliance will go back into standby 30 seconds later without any operation.
Cooking Methods
Example: Cooking Rice
Step 1
Put the rice and water into the inner pot; place the inner pot on the appliance.
Step 2
Press "Menu” or "+" "-" button to choose the Rice program.
Step 3
Press the "START” button for 3 seconds to start the program.
The same method for selecting the program can be used for all cooking modes.
Tips
You can set whether the appliance automatically enters to keep warm or not by pressing "START” for three seconds during cooking.
Ten Part DIY Setting Program
This program allows the user to set custom times and temperatures for their cooking process, up to 10 segments to be used in succession in the cooking session.
Step 1
Put the prepared food into the inner pot, place the inner pot on the appliance.
Step 2
Press the "Menu" button to choose the DIY program, press "TIMER/TEMP°C" button to adjust time and temperature. One press for adjusting the time, one more press for adjusting the temperature. Press "+" or "-" button to adjust cooking time and temperature. Press "+" "-" button at the same time to preserve the first part of the DIY setting.
If needing more parts of DIY setting, continue to press "TIMER/TEMP°C" for the same setting.
Step 3
After selecting the DIY setting, press the "START" button to start the program.
When you start the program, the display will countdown the first part of the cooking and will automatically begin and countdown the second part after finishing the first. After this has finished, the third part will commence, and so on.
Cleaning & Care
Detachable Aluminium Cover
The detachable aluminium cover can be disassembled from the appliance, please clean it with water and dry it with a soft cloth.
Steam Value
The steam valve can be disassembled from the appliance, please clean it with water and dry it with a soft cloth to avoid giving off a peculiar smell and blocking steam.
Water Collector
Empty the water collector after using the unit.
Inner Pot
Remove the inner pot from the appliance. Clean it with household abluent. Dry it with a soft cloth.
If the appliance is not being used, please store it in a dry environment.
Specifications and Circuit Diagram
Rated Voltage | 220-240V |
Rated Frequency | 50/60Hz |
Rated Power | 950W |
Capacity | 5L |
Troubleshooting
Problem |
Possible Reason | Possible Solutions |
Does not cook, or automatically shift to keep warm, or other malfunction of the unit |
1. Control board failure 2. Temperature sensor failure 3. Too much food and water in the inner pot |
Contact Kogan.com Support |
Fails to boil water for a long time |
1. PCB problems 2. Temperature sensor failure |
Contact Kogan.com Support |
Rice/food is not well cooked or takes too long to cook |
1. Cooking procedure has not been completed 2. Distortion of the heating element 3. The inner pot is not placed in the correct position 4. Some debris is on the temperature sensor or heating element 5. Distortion of the inner pot 6. PCB problems 7. Temperature sensor failure |
1. Let the appliance finish the cooking procedure 2. Contact Kogan.com Support 3. Turn the inner pot left and right to ensure it is in the correct position 4. Clean debris off the sensor and element 5. Contact Kogan.com Support re: replacement pot 6,7. Contact Kogan.com Support |
Heating element fails to work |
1. Power cord is not connected 2. Power cord is damaged 3. PCB is damaged 4. Heating element failure 5. PCB connection failure 6. Power board failure |
1. Connect power cord to electricity 2-6. Contact Kogan.com Support |
Spill-out when cooking porridge |
1. PCB board problems 2. Temperature sensor failure |
Contact Kogan.com Support |
In the Box
![]() |
![]() |
![]() |
![]() |
Spatula | Measuring Cup | Plastic Steamer | Power Cord |